Tripod Mount for Nikon Monarch M7 Binoculars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to mount binoculars to a tripod.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This piece lets you mount your binoculars to a tripod or any accessory with a 1/4 inch screw. It's designed for Nikon Monarch M7 binoculars but will probably fit others. The adapter can remain mounted as it fits into the bag. It allows the binoculars to fold almost completely.
You need a 1/4 inch UNC nut and a 1/4 inch UNC bolt of around 40 mm length. The screw can be pushed into the knob with a bit of force. You might want to use a nut to pull it through. Add a dash of super glue on the head prior to inserting if you want extra security.
The knurled knob is based on genja's design but modified for a cap head screw as well as shortened and slimmed down.
The depicted adapter is printed from Spectrum Premium PETG in Olive Green with 3 perimeters and 15% Adaptive Cubic infill and that's plenty strong.