1 / 6
NEOLINE NAPC-07 Portable AC to 150 mm Exhaust Hose Adapter — zdjęcie 1
1 / 6

NEOLINE NAPC-07 Portable AC to 150 mm Exhaust Hose Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

150 mm air duct adapter for NEOLINE NAPC-07 portable AC.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
48
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

NEOLINE NAPC-07 Portable AC to 150 mm Exhaust Hose Adapter

A two-piece exhaust adapter for the NEOLINE NAPC-07 PT/N1 portable air conditioner, designed to connect the front air outlet to a 150 mm round duct / flexible ventilation hose.

The adapter redirects the cold air from the front outlet into a standard Ø150 mm hose. I designed it as two main parts so that it can be printed on most common 3D printers without requiring an unusually large build volume.

Features

  • Designed for NEOLINE NAPC-07 PT/N1

  • Outlet for 150 mm ventilation / air duct hose

  • Main adapter is split into 2 printable parts

  • Spring-mounted to the existing hooks / attachment points on the AC body

  • No permanent modification of the air conditioner required

  • Additional detachable round flange included

  • Flange has holes for optional magnet installation

  • STL and STEP files included for printing and modification

The adapter is held against the air conditioner using springs attached to hooks on both sides of the housing. This keeps the adapter securely pressed against the front outlet while still allowing it to be removed when needed.

For the spring attachment I used this S-hook design:

https://www.printables.com/model/239107-camping-tent-s-hook-replacement

Thanks to the original author of that model.

Printing

My parts were printed in PETG.

Recommended starting settings:

  • Layer height: 0.20–0.25 mm

  • Material: PETG

  • No special high-resolution settings are required

  • Use enough perimeters to keep the duct walls reasonably rigid

PETG is recommended because the adapter is a relatively large functional part and may be exposed to temperature changes, mechanical tension from the springs and the weight of the connected hose.

Assembly

  1. Print both halves of the main adapter.

  2. Join the two sections together.

  3. Install the optional Ø150 mm flange if required.

  4. Attach springs to the hooks on both sides of the air-conditioner housing.

  5. Tension the springs so the adapter sits firmly against the front outlet.

  6. Connect the 150 mm flexible duct.

The separate flange can also be equipped with magnets if you want a removable hose connection.

Files

Included:

  • Main rectangular-to-round adapter

  • Ø150 mm duct connection

  • Optional magnetic flange

  • STL files

  • STEP / STP files

STEP files are provided so the design can easily be modified for other hoses, mounting methods or similar portable air conditioners.

Compatibility

Confirmed with:

NEOLINE NAPC-07 PT/N1

It may fit closely related NEOLINE models, but I have not tested them.

Tagi