1979 Trans Am Plaques
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Classic 1979 Trans Am & brewery-inspired wall plaque. Available in both Insert and Extruded versions
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These plaques were custom-designed to honor my son and his first creation of a flavor for an ale while working at a brewery. The brewery named all of their brews after classic cars, and my son was directly inspired to name his creation after the 1979 Trans Am I used to own (featured on the can design)!
I've included two different modeling approaches so you can choose the style that best fits your printing preference:
Insert Version: Designed with multipole drop down layers.
Extruded Version: A single drown layer so everything is extruded from the picture layer.
(Note: Custom text requests for "Matchless" or "IPA" can be accommodated upon request!)
Dimensions
Insert Version
Frame: 9.75” x 9.25” (inserted 0.0625”)
Thickness: 0.2”
Inner Frame Insert: 7.8” x 5.2” (inserted 0.0625”)
Lettering Insert Height: 0.0625”
Extruded Version
Frame: 9.75” x 9.25”
Thickness: 0.145”
Insert Depth: 0.0745”
Print Settings & Recommendations
Material: PLA
Layer Height: 0.12mm to 0.20mm (lower heights recommended for crisp detail on text and car lines)
Infill: 20% or higher
Infill Pattern: Gyroid or Grid pattern recommended for structural stability