1 / 1
Cobblestone Gaming Board Tiles — 1" Grid, 32mm Scale (Greathelm & Tabletop) — zdjęcie 1

Cobblestone Gaming Board Tiles — 1" Grid, 32mm Scale (Greathelm & Tabletop)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Seamless cobblestone paving for 28–32mm wargames and RPGs. The surface is built from a real cobblestone scan.

Ocena
0 / 5
Polubienia
6
Pobrania
60
Wydruki
0
Wyświetlenia
192
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Seamless cobblestone paving for 28–32mm wargames and RPGs — built from a real cobblestone scan, with a subtle 1" movement grid on every tile.

The surface reads as worn setts and recessed mortar rather than a repeating stamp, and every tile carries a subtle scored 1" grid for movement and measuring. Tiles butt together edge-to-edge with the cobbles and the grid running straight across the joins, so you can build a table of any size a section at a time.

What's included

  • 3" × 3" field tile (76.2 × 76.2 mm) — the building block. Print as many as you need.

  • 12" × 6" panel (304.8 × 152.4 mm) — a larger slab for covering ground fast, designed to be printed on its long thin edge so the cobble relief is resolved by your printer's fine XY motion instead of layer height. The result is an exceptionally crisp surface with no top-layer terracing.

  • Editable Blender source (.blend) — so you can rescale, restyle the border/grid, or remix the tiles to suit your own table.

The STLs are watertight, manifold, single-piece solids — drop them straight into your slicer.

Features

  • Real cobblestone surface — genuine setts, worn tops, deep mortar lines

  • Subtle engraved 1" square grid for gameplay

  • Seamless tiling — the pattern and the grid continue across every join

  • ~5 mm thick, flat underside, no cleanup needed

  • 32mm scale, with the stone slightly oversized so it prints cleanly on FDM

  • Editable Blender source (.blend) included for remixing

Recommended print settings

3" × 3" field tile — on thin side.

  • Layer height: 0.12–0.20 mm (0.08–0.12 mm for maximum crispness)

  • Walls: 3 · Top layers: 4–5 · Infill: 10–15%

  • Supports: none · Brim: Recommended for narrow footprint.

  • ~15–20 g each; several fit on one plate

12" × 6" panel — print standing on the 12" thin edge

  • Needs a bed ≥ 305 mm on diagonal axis and ≥ ~155 mm Z height

  • Layer height: 0.08–0.12 mm — the relief now prints in XY, so it's very fine

  • Brim recommended for the narrow footprint; no supports

  • Slower, but gives a large seamless slab with a flawless face

Assembly & use

Lay tiles side by side — the grooved joins double as mortar lines, so seams disappear into the paving. Leave loose for modular tables, or glue to a backing board.

I printed inTHE K5™ PLA Magic kexcelled3d

Notes

Designed for Greathelm, the micro-skirmish miniatures game of chivalric fantasy by Malev Da Shinobi — and equally at home with any 28–32mm skirmish or dungeon game. Check the game out here: malev-da-shinobi.itch.io/great-helm-pt

Unpainted, surface texture only — colour is yours to add.

Tip: the STLs are provided zipped — unzip before slicing.

Credits & licensing

  • Surface geometry derived from the "Cobblestone 01" texture by Rob Tuytel, sourced from Poly Haven — polyhaven.com/a/cobblestone_01 — released under CC0 (public domain).

  • Greathelm is a game by Malev Da Shinobi — malev-da-shinobi.itch.io/great-helm-pt. This model is an unofficial, fan-made accessory and is not affiliated with or endorsed by the creator.


Tags: cobblestone, terrain, wargaming, tabletop, 32mm, 28mm, Greathelm, RPG, dungeon, gaming board, 1 inch grid, modular terrain, base, paving, setts

Tagi