Simple Display Stand for Millennial Falcon 2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A generic, easy-to-print stand, made specifically to display the heavy Millennial Falcon 2.0
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed this awesome Millennial Falcon 2.0 by Captain_plan_it, but quickly realized that laying it flat just wouldn't fit on my shelf. I couldn't find a suitable stand, so I decided to make a simple, generic one myself.
It's a straightforward, utilitarian stand. Its main job is to securely hold the heavy ship at an angle, save space, and not distract from the highly detailed model itself.
The files include the main base and two options for decorative display plates.
Print Settings:
Main Stand: 0.4 mm nozzle, 0.20 mm layer height, 5% Gyroid infill.
Plate (CEC version): 0.2 mm nozzle, 0.14 mm layer height, 8% Gyroid infill (needs a smaller nozzle for the fine text).
Plate (SW version): 0.4 mm nozzle, 0.20 mm layer height, 8% Gyroid infill.
Disclaimer: This stand was designed completely from scratch as an independent accessory. No original files of the ship model were used or modified. This is not a derivative work.