Qidi Q2 LED Strip Mount (Frontal)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A LED strip mount to allow 24V COB LED Strip to be mounted without adhesives.
- Ocena
- 3 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 137
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I made this one so I can mount the 24V COB LED strip I bought without having to use adhesives. This way I don't have to worry it will eventually detach. It's a two part print, just glue the two parts with superglue. It uses the three m3 screws that are already in the area above the printer's door. One of them fixes the original LED strip to the printer's frame.
I printed this one with Tinmorry ASA in 0.20mm layer height. The 3mf contains the additional modifiers to enable the little pin and inset to be able to comfortably glue the pieces together. Just use a drop of superglue to fixate them together. You can print the parts without the pin/inset, but it's a lot easier to have that to align them properly.