Anarchist A Keycap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anarchist A, translucent Cherry MX keycap
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Cherry MX-compatible anarchist keycap. The model is optimized for keyboards with LEDs on the inside back of the keys. This model is prepared for a 0.12 mm layer height, so it becomes translucent without the need for transparent filaments, although I couldn't achieve a perfectly even light distribution. The keycap should be printed upside down and needs no supports.
The pictures show the model printed with white PLA, sanded and hand-painted black (not very skillfully). Users might have to tweak the connector depending on the tolerance levels of the printer.
Feel free to use the model as you will. Attribution is only required for the author of the original model.