Mod10 Q100k Side Mount For 10" Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quantum Fiber Q100k Smart Nid Mount for the side of a Mod10 10" Rack
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
A mount for the Quantum Fiber/AT&T Q100k Smart NID. There may be other Fiber providers which use this, although these are the two that I am aware of.
This Mount replaces one of the Side panels of the Mod10 10" server rack and allows for the NID to be hung along the side of the rack. As this compenent doesn't really fit natively inside of a standard rack sideways, while still allowing for room to insert the cables, this was the quick and dirty solution that doesn't involve buying new parts.
Printed in ASA-GF, 0.2mm layer heights. Probably a bit overkill, but it's what I had on hand. I would recommend printing all 3 parts at once, or slowing the Pins way down, otherwise you may run into layer cooling issues and the pins will come out poorly. The pins push right into the holes on the side plate from the outside, allowing for the Q100k to be hung from the side with all of the cable terminations running out the bottom.
QTY) 1 Open Side
QTY) 2 Pegs