Sim racing dash display unit (ddu) case | For 5 inch screens and lower only
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is not the best case in the world and i'll admit that.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Open Community License v1.1
This screen case was crappily designed around the ELECROW 5 inch screen. (https://www.amazon.com/ELECROW-Touchscreen-Compatible-Capacitive-Driver-Free/dp/B0CYKXCM8J/ref=sr_1_3?crid=14ZMDQGTXC4EI&sprefix=elecrow%2B5%2Binch%2Bscreen%2Caps%2C104&sr=8-3&th=1) and if you don't mind sanding, gluing, drilling, or threading screws (if you are using them) a little, then this case will work fine for you. I added some holes so you can thread some screws in if you desire. If you don't want to use screws, super glue will work fine. I'm going to provide .stl and .f3d files so you will hopefully be able to design your own mounts and change the current design if needed. I tried to focus on the aesthetics of this design quite a bit so i had to make some sacrifices in terms of compatibility (i'm really just an idiot). Please post builds below because i would love to see people using this!