XIAO ESP32S3 & Wio-SX1262 MeshCore Room Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
XIAO ESP32S3 & Wio-SX1262 Room Case. Built to be used with Stock antennas.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
XIAO ESP32S3 & Wio-SX1262 Room Case. Built to be used with Stock antennas. Not built for outdoor use. Built to be a MeshCore room server enclosure and should be near an external repeater because the stock antennas are crap. CAD document can be found here. Link to components used can be found here.
Instructions:
Mount antennas on connectors. Large antenna goes on esp32, small antenna goes on radio. Cut off pins on esp32 module. Take adhesive cover off. Join two components. Insert components to case. Remove adhesive cover from one antenna and put it on the bottom. Remove adhesive cover from other antenna and mount it to the side. The top panel goes on with 4 M2x12 screws. No bolts are needed. Because the Lid and container expand and think at different rates, the lid will likely have an arch in it when it is in place. I fixed this by wrapping the middle portion in some packaging tape.