CaseSnap — Minimal Handlebar Phone Mount | Snap-On, Case-Bonded, Trail-Ready
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-on phone mount for MTB handlebars. Slim adapter bonds to your case, clamp stays on the bar. Fits 22.2mm bars.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Your Phone on the Bar - Discreet, Stable, Ready to Roll.
No GoPro? No problem. CaseSnap turns your smartphone into a capable trail camera - permanently attached to your phone case, always ready to snap onto the handlebar in seconds.
The concept is simple: a slim adapter plate bonds permanently to your phone case (double-sided tape or super glue). The matching handlebar clamp stays on your bike. Whenever you want to record, just slide the phone in - snap, locked, rolling.
No fiddling with clamps. No scratching your phone. No bulky bracket ruining your cockpit look.
See it in action: https://youtube.com/shorts/v4gVRevw4yY
KEY FEATURES
MINIMAL & DISCREET: Slim profile - the adapter on your case is barely noticeable. No massive bracket blocking your view.
SNAP-ON SYSTEM: Two-part design - adapter plate on the case + clamp on the bar. Mount and dismount in one smooth motion.
STABLE ENOUGH FOR VIDEO: Secure clamp mount holds the phone firmly through vibrations - smooth footage on gravel, singletrack, and road.
UNIVERSAL FIT: Works with any phone case. Fits standard 22.2mm handlebars.
PERMANENT ADAPTER, FLEXIBLE USE: The case adapter stays on permanently. The bar clamp stays on your bike. Together: instant cockpit cam whenever you need it.
WHAT YOU NEED (hardware not included)
1x M5x25 hex head bolt
1x M5 nut
2x M5 washers
Double-sided tape or super glue (for the adapter plate on the case)
Available at any hardware store for around 1-2 EUR.
PRINT SETTINGS
Adapter plate: ASA+ (UV-stable, heat-resistant), alternative PETG. Nozzle 0.8mm, layer height 0.24mm, nozzle 245C, bed 80C, 100% infill, fan 15%, no supports, brim.
Handlebar clamp: PP (polypropylene) recommended - slightly flexible, grips the bar firmly without cracking. Alternative PETG. 100% infill, no supports, brim. PP needs good bed adhesion (PP tape or glue stick).
PRO TIP
Apply double-sided tape to the adapter plate and press firmly onto your phone case for 60 seconds. For a permanent bond, add a drop of super glue around the edges. Don't overtighten the handlebar bolt - hand-tight plus a quarter turn is enough.
INCLUDED FILES
Adapter plate (STL + 3MF)
Handlebar clamp 22.2mm (STL + 3MF)
Snap it. Mount it. Shoot it.
Questions or feedback? Feel free to reach out.