1 / 3
Print-in-Place Mechanical Gecko — Articulated (175 mm) — zdjęcie 1
1 / 3

Print-in-Place Mechanical Gecko — Articulated (175 mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print-in-place articulated gecko: 6-segment jointed tail and movable legs. No supports, no assembly. 175 mm.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
21
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A robotic gecko printed in one piece, fully articulated — a 6-segment jointed tail and movable legs, no supports and no assembly needed. 175 mm long. A fun flexi desk companion.

Recommended print settings:

Material: PLA / PETG / ABS

Supports: none (support-free)

Nozzle: 0.4 mm

Layer height: 0.20 mm (0.16-0.24 mm works)

Perimeters: 3-4 walls

Infill: 25-30% gyroid or grid

Bed adhesion: flat base, no brim or raft needed

Tip: gently flex the joints after printing to free them for smooth articulation.

All STL files are watertight, manifold and cleaned for reliable slicing.

Tagi