Mini Mating Nuc - Langstroth Deep Frame Carrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adaptation of frame design to carry LBussy Mini Mating Nuc frames so they can be drawn out in a standard Langstroth Deep
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cross linked from https://www.thingiverse.com/thing:7396914
Big thanks to LBussy for his inspired Mini Mating Nuc designs.
One problem I noticed is its difficult and time consuming to initially get the mini frames drawn out; so I came up with this.
Credit due to https://www.printables.com/model/1421923-langstroth-beehive-frame-deep for the original frame design I modified to do this.
What this is, is a larger frame that will fit in a standard Langstroth Deep box, and carry up to six of the LBussy mini frames. This will allow the wax to be drawn by the larger populations of one of your main hives, and quickly. Some wonky comb is to be expected, but you can trim as needed.
Note this frame is slightly larger than a standard frame, in order to safely hold the mini frames. It may be necessary to remove 1-2 standard frames from your deep to make room for this.
Ensure connectors are glued (I used superglue) and screws used for the side bars. This is a first draft, and a work in progress. Hoping to improve structural strength in future iterations. Comments and recommendations are welcome!
Recommend printing in food safe PLA or PETG. I printed 3 outer shells with 20% gyroid infill and it feels solid.