1 / 1
White Rabbit Bookmark - Alice's Adventures in Wonderland
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bookmark was created Hueforge as a gift to my friend Annie
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50.14x150mm in size
You may print at higher layer heights below the Base Thickness of 0.24mm
The Max allowed Thickness is 2mm and the Actual Thickness is 1.52mm
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Red
At layer #10 (0.88mm) swap to Ash Gray
At layer #12 (1.04mm) swap to Jade White for the rest