Carrying Case for Kobalt Ratchet Control Screwdriver Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hold the screwdriver, extension, and bits in their original keepers.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Carrying case for a ratcheting control screwdriver set from Kobalt. A friend needed something to put his set in so that everything stayed together in his toolbox and whipped this up for him. The hinges were meant for a 3/16" wood screw, 1.5" long with a 3/4" smooth shank that I had around, but anything that can dig into the plastic should work as long as it has that smooth shank to allow for the lid to freely rotate. I added spaces for 3mm x 8mm diameter magnets to make sure it closes better if it goes on the road.
Printed mine in PETG, but I'm sure PLA would be great as well. 2 perimeters, 15% infill, no supports. The usuals.