Technics Turntable Overhang Gauge 52mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 52mm overhang gauge to set your needle in the correct tracking for your S shaped tonearm Vintage Turntables
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
I made this overhang gauge back when I was a seller on eBay and gave these away as a freebie with products I sold. Its a 52mm overhang gauge and its set to fit the original head-shell from a Technics SL-B2 turntable. This will work for the Technics S shaped tonearm and 1/2 head-shell for most vintage Technics turntables from the 1970s to 1980s.
You can also use these to display your head-shells to show off your vintage prized cartridges too.
This will NOT work as a overhang gauge for vintage Pioneer turntables as they use a 49mm tracking. This is for Technics only.