Openflexure Microscope V7 - Low Resolution
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3MF Project ready to print the Low Resolution version of the Openflexure Microscope V7
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Share Alike
These are the 3MF files for printing the Low Resolution version of the OpenFlexure V7 Microscope.
Uploaded to make easier to other people to have a ready to use project, with parts arranged 3 plates for making easier to print it in 3 different colours. Check the main picture to see the colours I chose and how they arranged across the plates. The attached projects set a custom slice gap closing radius as it is suggested by the docs
You will find two projects:
For a Raspberry Pi 4
For a Raspberry Pi 3
This microscope is a wonderful science project for children. Check out the original assemble instructions and forum for building your own one.
The license matches original OpenFlexure project, but you don't have to give me any credit, give credit to the team behind OpenFlexure.
Note: I had some string problems on the bridges. Printed with PLA using a Prusa Core One+. Take it into account if you have the same model, you may need some tuning for the bridges.