1 / 7
UK National Beehive Entrance Reducer/Block with Rotating Easy‑Out Tabs (Thorne Compatible) — zdjęcie 1
1 / 7

UK National Beehive Entrance Reducer/Block with Rotating Easy‑Out Tabs (Thorne Compatible)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two‑size entrance reducer/block for UK National hives. Thorne compatible, durable, easy‑out tabs, no‑support print.

Ocena
0 / 5
Polubienia
4
Pobrania
11
Wydruki
0
Wyświetlenia
202
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This Entrance Reducer/Block is designed for UK National beehives, specifically sized for Thorne wooden National floors.

It provides two entrance widths — 115 mm and 60 mm — allowing you to quickly adjust the hive opening depending on colony strength, robbing pressure, or seasonal needs. The Easy‑Out Tabs rotate to suit your preferred configuration and make removal simple even with gloves.

The fully assembled length with 2x Easy-Out Tabs is 420 mm.

You can print this as:

  • A single piece (fits diagonally on a Prusa XL), or

  • Two snap‑fit sections suitable for any standard‑size printer

All STL files are pre‑oriented for correct printing.

🖨 Printing Notes

  • Supports: Not required

  • Nozzle: 0.4 mm

  • Layer height: 0.2 mm

  • Material recommendation:

    • ASA or ABS for UV resistance and outdoor durability

    • Food‑safe variants are ideal if available

🧩 Assembly

  • The two‑part version uses a simple snap‑fit joint. No glue or screws required.

  • Both versions may require 2x National Entrance Block Easy Out Pull Tabs

🐝 Colour Identification

Printing the reducer in different colours can also help with hive identification. Distinct entrance colours make it easier for bees to orient themselves and return to the correct hive, especially in busy apiaries or when several hives look similar. Using contrasting colours for neighbouring hives can reduce drifting and help you visually track colonies at a glance.

Community & Feedback

This is my first full 3D‑printed design, so I genuinely welcome any feedback, suggestions, or constructive criticism.  If you spot something that could be improved or you’d like a modified version to suit your own setup, feel free to let me know.  I’m happy to make adjustments and add new variants.

Tagi