1 / 3
Bialetti Brikka Top Knob
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
On my beloved Bialetti Brikka for two, the top knob broke. This is the replacement that fit surprisingly well.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
No tapping needed — I used a 2.5 mm screw and just drove it straight into the printed hole, letting it cut its own thread. That held fine for me.
I printed it on its side, with the flat back (the vertical face) down on the plate. Somewhat to my surprise, this held up better than the orientation with the screw hole facing down.
Material: PC-CF, chosen for heat resistance. Note that it isn't food-safe, but the knob doesn't contact the coffee.