Bionicle Mask - Kanohi Khali
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Bionicle compatible mask that I designed for fun.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello everyone!
Bionicle was one of my favorite toy lines growing up, as is the case with many people my age, with the Bionicle masks being my favorite part. For many years I've loved seeing the masks that talented designers like Rothanak, Galva, Kingsidorak, and many more have created, and I've always thought it would be fun to make one of my own. I've experimented with making masks as a CAD exercise, but I've never felt like I was happy enough with them to release. But, after having so much fun working on the Mata head piece with studs for eyes, I decided to take one of those unfinished designs and bring it to a place I was happy with it. I figured it needed a name, so I decided to call is the Kanohi Khali, The Mask of Vacuity.
Part Information
Both stud and axle connection versions of mask have been uploaded, and the mask should fit Mata, Mc-toran, and Metru style heads. I recommend the stud connection for use with Mata and Mc-toran heads, but either version works well with Metru heads.
Printing Information
Due to the size and level of detail, I recommend printing this part at a more fine resolution than you might normally print at. I toleranced the stud and axle connection fittings around printing this part at 0.12mm layer height, so I recommend that print resolution. This part will require supports material, and I recommend the print orientation below for the best bed adhesion and surface results. Tree style supports are recommended.
Sendoff
It was quite fun experimenting with this project, and I hope everyone else enjoys it as much as I have!