1 / 2
Nozzle Tool for Shure SE846 In-Ears — zdjęcie 1
1 / 2

Nozzle Tool for Shure SE846 In-Ears

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 3D-printable tool compatible with Shure SE846 in-ear monitors to loosen or tighten down the nozzles.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
26
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Share Alike

Nozzle Tool for Shure SE846 In-Ears

Lost the metal tool for your SE846s and need to clean them or swap out the internal sound profile nozzles?

Same, but I really don't want to deal with ordering another one. So I made this in FreeCAD 1.1.3.

This grips the metal pits on the nozzle nice and firmly and can be used not only for loosening, but tightening the nozzles down.

Instructions

Print in the presented orientation at 0.2mm layer height. No supports are needed. I confirmed that this works fine with Hatchbox PETG, but no idea how well it'll work for materials like PLA. YMMV.

Tagi