Sell Me a Sasquatch - Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An insert for Sell Me a Sasquatch. It holds sleeved cards!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 1
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Model Description:
This is an insert for the board game Sell Me a Sasquatch.
My goal in this was to design a simple insert that allowed me to sleeve the cards in the game and still fit in the original box without any lid lift. The included cards are split into two stacks with compartments in the middle for the point tokens, stand, and Sasquatch token.
Please post your makes and comments!
P.S. Hello Planet Money Fans!
Relevant Links:
The Game: https://www.explodingkittens.com/products/sell-me-a-sasquatch
BGG: https://boardgamegeek.com/boardgame/474341/sell-me-a-sasquatch
Sleeves: https://www.dragonshield.com/products/clear-matte-sleeves?variant=57683619021187
Sleeves used:
I used Dragon Sleeves (Standard – Clear/Matte) for this game.
Print Instructions:
I printed this in PETG with a layer height of 0.25mm with a 5% infill (Gyroid).
How I made this:
I made this in FreeCAD and I made this model mostly parametric for ease of use. If you need to change the sleeve dimensions you can modify the following settings in the dimensions spreadsheet as shown below in the attached FreeCad files. I have included the FreeCAD files if you would like to modify anything.
