1 / 3
Century Graphic Lens Board - Gauthier IBSOR No.3 (2x3 Baby Graflex) — zdjęcie 1
1 / 3

Century Graphic Lens Board - Gauthier IBSOR No.3 (2x3 Baby Graflex)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount a Gauthier IBSOR No.3 Shutter to a 2x3 Crown Graphic, Century Graphic Camera

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

A 3D-printable lens board for mounting a Gauthier IBSOR No. 3 Shutter  on a Century Graphic (Baby Graflex) / 2¼ × 3¼ Graphic camera.

This Lens board is threaded, I had designed it this way since my shutter came without ring or flange.

The thread specs is revers engineered from the shutter I own. Thread specs is M39x0.9, with a .40mm diametrical adjustment for 3D printing tolerances.

Please also see my retaining ring for this shutter if you are looking to mount this to another board.

Application Notes:
- Tested with PLA and PETG
- Print camera side up. 
- 0.15mm layer height.
- Use scarf joints and randomize seam positions.
- Avoid crossing perimeters.
- 15% Gyroid infill.
- Print in Black or Matte Black filament.
- Bellow draw. The baby graphic has a bellow draw of 7¾ inches, or about 196 mm.  That might limit the focal lengths you can actually use on this camera. 

Tagi