1 / 3
Hanging Soap Tray - 2 Hanging Holes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This soap tray is designed to be adhered and removed from shower walls using two suction cup mounted hooks. It is…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
This soap tray is designed to be adhered and removed from shower walls using two suction cup mounted hooks. It is light weight, prints on its back and requires no supports. This is a two mounting hook variation of a previous single hook soap tray. I haven't had a chance to 3D print this version yet.
The back of this version is a little shorter than the single hook version. Also, you will likely need slightly smaller suction cups than what I used on the single hook version.