Concave Corner Radius Stencil Template - Metric & Imperial Versions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are stencils or templates for marking or scribing concave arcs on corners in .25 inch or 5 millimeter…
- Ocena
- 5 / 5
- Polubienia
- 121
- Pobrania
- 256
- Wydruki
- 2
- Wyświetlenia
- 1002
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
These are stencils or templates for marking or scribing concave arcs on corners in .25 inch or 5 millimeter increments. There are four versions: 4 & 6 inch, and 100 & 150 mm lengths. These are designed to be used with a mechanical pencil or extra fine tipped marker, such as a Sharpie. Small clearance channels have been provided to help with accuracy on rough edged materials. 22.5 & 45 degree angle notched are included, as well as hanging holes for peg board hooks, screws, nails, etc. A chart has been provided to give the widths of the radii slots/channels; this is because the slots must be wide enough to fit the writing instrument. See photos for more details.
The approximate filament requirements for each are:
.25" - 4" 36g
.25" - 6" 69g
5 mm - 100 mm 31g
5 mm - 150 mm 59g
For round/convex corner stencils, see: