Ultra-Slim CF + SD Card Case – 6× CompactFlash / 4× SD

Ultra-Slim CF + SD Card Case – 6× CompactFlash / 4× SD

A slim protective storage case designed to hold:

• 6 CompactFlash cards

• 4 full-size SD cards

Each card has its own separated slot. The central finger cut-outs make the CF cards easy to remove, while the outer wall remains completely closed for better protection.

Sliding lid

The lid has a deliberately generous sliding clearance and does not rely on a tight friction fit. Two full-length C-shaped side clips wrap around the long edges of the case and hook underneath the bottom.

This makes the lid secure while still allowing for normal dimensional differences between printers and materials.

Print settings

• Material: PETG recommended

• Nozzle: 0.4 mm

• Layer height: 0.20 mm

• Wall loops: 4

• Infill: 10–15%

• Supports: No

• Brim: Not required

Print both parts in the orientation provided in the 3MF file. The lid should be printed with its large exterior surface directly on the build plate. Do not use automatic orientation.

Let the lid cool completely before removing it from the build plate. Because it is long and thin, removing it while still warm may cause the side clips to bend slightly inward.

Assembly

Slide the lid onto the case from the short end. The central section guides it loosely, while the external clips hold the case securely from both sides and underneath.

If the lid feels slightly firm after printing, slide it on and off several times—the contact surfaces should quickly settle in.

Designed as a compact solution for camera bags, film sets, photography kits and memory-card storage drawers.