Branana brushless nerf blaster (beta)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Beta files, if you know you know
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 520
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Please note! Still very much in beta, even though I'm adding more and more finalized stuff. This is not yet meant to be built if you're not part of the people who are in the beta.
Although likes and downloads are always appreciated for the prusameter ;)
Updates
27-10-2026:
firmware is released! It's the full Bolt OS code I've been finetuning for quite some time now, and it is awesome. Also included the manual (See pdf in files) and a short video explaining how Bolt OS works:

25-10-2026:
files seem to be working great so far. Only thing that needs to be made a little bit easier is the mosfet board. I'm using a custom one, that is not easily available (nothing special, just easier to solder all the wires). So I'm looking into generic solutions. Once I've found one I'll update the manual and schematics (right now you have to figure out yourself how to wire it up with a mosfet).
Firmware will also be available once I've solved the mosfet situation.
24-8-2026:
new core001 file, cage and core didn't match screw holes
updated solenoid tpu spacer to be thicker.
barrel stabiliser was too high, made it slightly less high to fit better in the shell
first draft of the build guide
Updated BOM with necessary screw sizes
23-08-2026: Increased cage motor screws chamfer, to make the motor screws sit flush with the bottom of the cage more easily.
Description
Uses lepus grip, otherwise original brushless design. Does up to 150 fps, 15 dps, sub 100 msec spinup time.
For the people not in the beta: no worries, build guide etc will come in about a month or so.
BRRRT!