Dodgers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dodgers fan art
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
A friend of mine asked me if I could make a 2 layer "Dodgers plaque" for his Dodgers collection. I looked around for existing models but was not happy with the quality out there so I created this from scratch.
For print quality purposes, I made this model in three pieces and printed each on a textured surface then glued together. I added positioning guides so all the pieces would line up and glue easily.
Printing tip: Print the front side of each piece face down on a textured plate. Allow to fully cool before removing from the print bed for nice flat pieces. I also added 10 perimeters on part 1 (back plate) so there are no visible artifacts between the perimeter and the face for quality appearance (will add time to print).
Scale as needed. Oh and before I forget I also did the same for an "LA" model which I will add to Printables as well.
Enjoy!