EBB36 Gen2 Mount for Sherpa Mini + Archetype toolheadasdf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified to add a 3rd mounting screw that lines up with the archetype tool head screws.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Thanks @B A for the great base design.
Extended the fork down to reach the screw on the rear extruder bar on the archetype toolhead system. I think this should be universal for everything except the angled breakneck mounts. Also includes a spacer for that bottom screw, 6mm tall m3x16 + Washer should be the new screw to use in that spot.
Removes the spot for the heatsets since sherpa mini extruder and thb mounting shares the same holes.
Also gives a bit more clearance for the inductor on the back of the EBB36 Gen2, I had it crack on one of my boards. Not sure if it was from physical contact or unrelated, but I include the extra spacing just in case.
This still has extra holes for for the orbiter pattern, I hate mesh editing and it was more work than it was worth to remove those. They shouldn't effect anything otherwise.