LA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LA Dodgers fan art- 2 piece for print quality
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
A friend of mine asked me if I could make a 2 layer "LA Dodgers plaque" for his Dodgers collection. I looked around for existing models but was not happy with the quality out there so I created this from scratch.
For print quality purposes, I made this model in two pieces and printed each on a textured surface then glued together. I added positioning guides so all the pieces would line up and glue easily.
Printing tip: Print the front side of each piece face down on a textured plate. Allow to fully cool before removing from the print bed for nice flat pieces. I also added 10 perimeters on back plate (in the slicer) so there are no visible artifacts between the perimeter and the face for quality appearance (will add time to print).
Scale as needed. I forgot to take finished pictures of this. Ill try to get some added when able.
Enjoy!