Indoor Drip Edge Channel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A miniaturized gutter, if you will, for controlling where water runoff on a wall goes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This prototype channel is intended to prevent wall runoff from spotting up the windows of several business storefronts I maintain. While I have designed it with that use case in mind, it can just as easily be used outdoors if printed in PETG / ASA.
Naturally, it has to be installed with a slight slope just like any gutter system. For best results, wrap a long string around the screw for the tip before driving it completely down, (blue part) than tie a weight to the end of that string and wrap the excess until it is resting tautly in a decorative catch vase or something at the base of the wall. Make sure the string is hanging from the tip spout so water is guided down the string and not running down the wall again.
This is still a prototype pending practical tests, so please share your feedback. The Fusion 360 CAD file is attached and most dimensions are parametrically defined.