Schweiz, Switzerland
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D model of Schweiz, Switzerland, at 1:1'000'000. (water surfaces recessed)
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Haptic Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D model of Schweiz, Switzerland, at 1:1'000'000.
It measures 34.8 × 22.1 × 0.9 cm and covers real terrain between 193 and 4634 m above sea level — heights are at true scale, with no vertical exaggeration.
WHAT'S IN IT
- Terrain from swissALTIRegio: 10 m source data on a 200 m model grid
- 276 still water bodies levelled, water surfaces recessed 0.5 mm
- Place name and scale engraved into the underside
PRINTING
- The model is one closed, watertight body — 2,076,772 triangles
- No supports needed: terrain has no overhangs
- 0.1–0.2 mm layers. Adaptive layer height suits relief well — fine on the ridges, coarse on the flats
- Base is 4 mm thick under the lowest point
- Split into 4 parts of 17.4 × 11.0 cm for a 220 × 220 mm bed, joined by 6 printed alignment pins in the base
DATA
Built from the open geodata of swisstopo, the Swiss Federal Office of Topography:
- swissALTIRegio (terrain)
- swissTLMRegio (water bodies)
- swissBOUNDARIES3D (administrative outline)
This data is free to use, including commercially, and derived works may be shared — provided the source is credited:
© Data: swisstopo
Made with Manifold, which turns swisstopo geodata into printable models.