1 / 2
Duet Magnetic Filament Monitor Mount for Hemera ToolChanger Tool Head — zdjęcie 1
1 / 2

Duet Magnetic Filament Monitor Mount for Hemera ToolChanger Tool Head

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Can be used to mount a Duet Magnetic Filament Monitor to an E3D Hemera ToolChanger tool head. The mount is "shimmed"…

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
132
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Can be used to mount a Duet Magnetic Filament Monitor to an E3D Hemera ToolChanger tool head.

The mount is "shimmed" at the top, above the "V6_Receiver_Top" part from the toolhead. You will need to switch to 4x 18mm M3 screws to make room for attaching the mount.

Use the "lifted" version if you want to be able to print the design flat without needing support, but note that this means there is more distance to the extruder and more flex in the filament as a result.

Print Settings

Printer:

Jubilee

Rafts:

No

Supports:

No

Resolution:

200

Infill:

15

Filament:

Prusament PETG

Jet Black

Category: 3D Printer Parts

Tagi