Bit Adapter - Leatherman-bit to 1/4"-slot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to snugly fit a leatherman bit in a 1/4" slot without it wobbling or falling out(especially for short slots).
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Adapts a standard 1/4" slot to securely hold leatherman bits.
-Yes, technically a 1/4" slot can already drive leatherman bits, but in practice they tend to wobble around or fall out, especially short slots!
The adapter isn't perfect, but it definitely makes using the leatherman bits far easier.
For Roxon specifically, as they use a shorter bit-holder, I've designed an alternative version with a collar so it prevents any left-right wobble of the bit.
PRINT INSTRUCTIONS: 100% infill; I highly recommend using PC filament or similar; ASA or PETG might also work, but no guarantees (PLA will probably fail).
There is a slot for a 3mm magnet; it is beneficial, but the print should work without it.