Pimax Crystal Super x Vive Face Tracker or Babble or Blank Ancillary Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use your vive face tracker or babble face tracker with your pimax crystal super. Or attach anything with the blank.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation platform. These models are only listed here on printables, for free, for you to print or use a print service like PCBway or JLCPCB, or your friends.)
Adapter for the crystal super for a vive face tracker.
It has clearance for a usb to attach to the bottom usb port, such as the lighthouse faceplate.
It also clears the exhaust ports and microphones.
You will need:
2x m2 x 5mm screws (mandatory)
1x m3 x 18-20mm screw
1x m3 hex nut
How to print:
Print flat with build plate tree supports.
Blank version:
If you want to attach something else, there is a version with a 5x14 bolt pattern with m2 tapped holes.
Changelog:
8.18.26 - Release