iPod Nano 3G case back/backplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacment backplate so you can put in bigger batteries and maybe a bluetooth module. Original size coming soon.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I also have a slim version of this which is not tested, so i wont publish it yet.
This thick version is for putting a bigger battery in (i used an 804040 pouch) and a bluetooth module also fits.
I print it on the back with "make overhangs printable" enabled.
if you want to put in the bluetooth module, dont use CF filament as it blocks the bluetooth signal.
Needs to be glued to the ipod. I like to use uhu por as it is strong enough and overspill can be just rubbed off. Also can easily be split apart again while being able to remove all glue.
