Ridgid palm router circle jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple circle cutting jig that works with my Ridgid cordless palm router. It should also work with the…
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 134
- Wydruki
- 2
- Wyświetlenia
- 809
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple circle cutting jig that works with my Ridgid cordless palm router. It should also work with the corded version as it looks to come with the same mounts. It reuses the mounting bars and thumb screws used by the edge guide that comes with the router.
It uses 2 8-32 nuts to lock in the thumb screw. They are a tight fit, but should be able to be press-fit without much difficulty. The center hole is designed to fit a 3 penny nail, it could be drilled out to accommodate something larger if you really wanted.
Use whatever router bit you like, but works well with 1/4" spiral bit.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40%
Filament: AMZ3D PLA Yellow
Notes:
The stronger you can print this the more durable it will be. It doesn't need to be super strong to do the job, but stronger just means you can be rougher with it.
Category: Machine Tools