Fully Parametric Straight Spur & Bevel Gear Generator V2.2 (Solid & Spokes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rock-solid, customizable straight gear generator for OpenSCAD. Features flat spur and bevel modules, edge chamfers, sm
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
### ⚙ Stop fighting static STL files! Create your perfect custom gears in seconds.
If you are tired of searching for the exact gear with the right shaft diameter or tooth count, this fully parametric OpenSCAD utility is your ultimate solution. Version V2.2 is engineered specifically for FDM 3D printing, focusing on flawless mechanical strength and clean slicing.
#### 🌟 Key Features of V2.2:
* True Parametric Control: Easily change tooth pitch, pressure angle, heights, and bore hole sizes at the very top of the file.
* Solid/Spokes Toggle: Set solid_gear = true for a heavy-duty corporate monolith, or false to instantly cut lightweight weight-reduction spoke windows.
* Lathe-Cut Chamfers: Features a specialized 3D Boolean cone-cutting engine. No more broken meshes or artifacts at the roots of the teeth!
* Bevel Gear Support: Includes a dedicated conical gear module for building 90-degree gearboxes.
#### 🛠 Quick Setup Guide:
1. Open the .scad file in OpenSCAD.
2. Locate the // --- PARAMETERS CONFIGURATION --- block at the top.
3. To make a solid gear, set: solid_gear = true;
4. To add smooth spokes, set: solid_gear = false;
5. Press F5 to preview, or F6 to render a perfect 3D manifold model ready for STL export!
#### 🖨 FDM Printing Recommendations:
* Material: PETG, ASA, ABS, or Nylon for active machinery. PLA for prototyping only.
* Perimeters (Walls): Set to 4–5 walls. You want the gear teeth to be entirely solid concentric plastic lines.
* Infill: 40%–60% with a Gyroid pattern for equal omnidirectional rigidity.
---
If you like this design, please drop a Like, post your Makes, and share your feedback for future upgrades!