Festung Aarburg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D model of Festung Aarburg, Switzerland, at 1:5000.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Haptic Models
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a 3D model of Festung Aarburg, Switzerland, at 1:5000.
It measures 10.0 × 10.0 × 2.0 cm and covers real terrain between 392 and 468 m above sea level — heights are at true scale, with no vertical exaggeration.
WHAT'S IN IT
- Terrain from swissALTI3D: 0.5 m source data on a 1 m model grid
- 783 buildings from swissBUILDINGS3D
- 4 bridge sections kept above the terrain
- 6 watercourses made to run downhill
- Place name and scale engraved into the underside
PRINTING
- The model is one closed, watertight body — 550,944 triangles
- 0.1–0.2 mm layers. Adaptive layer height suits relief well — fine on the ridges, coarse on the flats
- Base is 4 mm thick under the lowest point
- A separate drop-in frame is included: 10.6 × 10.6 cm, 6 mm tall. The model drops in from above and rests on an inner ledge — print it in a second colour
DATA
Built from the open geodata of swisstopo, the Swiss Federal Office of Topography:
- swissALTI3D (terrain)
- swissBUILDINGS3D (buildings)
- swissTLM3D (water bodies, bridges)
This data is free to use, including commercially, and derived works may be shared — provided the source is credited:
© Data: swisstopo
Made with Manifold, which turns swisstopo geodata into printable models.