Smaller SpaceMouse with Hall Effect Joysticks - Heat Inserts (no visible Screw Heads) - Kempy PCB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remixed frame to incorporate Kempy's PCB, for those who want a sleek design but still want the PCB.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had original intented on using the original design for the Small SpaceMouse remix by StefanN but accidentally ordered Kempy's large PCB's (instead of the hall effect joystick PCB's). Oops! Oh well, might as well incorporate it, right?
I spliced the frame of both models together so that you can still enjoy a frame with no visible screws while also using the convenient PCB.
Use all the files and instructions first from StefanN's version, including the base, frame and lid, and use the PCB and any additional files from Kempy's version, as needed, such as the wire cutting template. Make sure to grab the gerber file for the hall effect PCB's from here.
Edit: I both changed the brass insert holes to be deeper and changed their location. My original upload's holes were way off of where the PCB's holes are. They should align now. I added an extra hole on the bottom that lines up with the holes on top, which should make screwing them in easier, since you can now put your allan key through said hole. It should be obvious what I mean once you print it.
I also changed the lid to have slightly lower nubs, since they weren't flush on draft printed copy. I also changed the bottom to line up with the changed holes