1 / 1
Pioneer Overhang Gauge for PL-100 thru 400 Series Pioneer Turntables 1980 Models PL-518
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pioneer 49mm overhang gauge for Pioneer S shaped tone arms that use the 49mm gauge and 1/2 headshell.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
A Pioneer 49mm overhang gauge easy to print and use for 1/2 headshells on S shaped tone arms. Since your 3D printing this you will need to check the measurement to make sure that its 49mm from base to tip. Reason is that some 3D printers are calibrated and some not.
I print these in PLA but you can do it in PETG too.