Fidget Traffic Light Latching Buttons (8×8 mm, 3-Way)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three-button traffic light for latching 8×8 mm switches. Red, yellow, and green stay pressed until clicked again.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
A compact traffic-light control with three latching mushroom buttons — red, yellow, and green. Each button uses a retaining-state 8×8 mm switch: press to lock it down, press again to release. Handy as a status panel, desk toy, or enclosure control.
This is a mechanical housing only. Electrical connections are not included.
## Parts
### Printed
- Dark gray three-bay housing
- Red, yellow, and green mushroom plungers
- White attachment loop (optional; for hanging or a keychain)
### Hardware (not included)
- 3× latching (self-locking) 8×8 mm push buttons
- Fasteners as used on the SOS button: 2 mm × 8 mm self-tapping screws if your housing version is split
## Assembly
1. Install the three latching 8×8 mm switches in the housing, one per bay.
2. Fit the red, yellow, and green plungers over the switch stems (twist-lock / snap into the circular collars).
3. Attach the loop if you want to hang it.
4. Press a button to latch it; press again to unlatch. Each color holds independently.
## Print notes
Print the housing and the three colored plungers separately. The plungers should move freely in the collars so the latching switches can click fully down and spring back up. Use traffic-light colors for the caps so the state is obvious at a glance.
## Related
Companion to the SOS mushroom push button (momentary / non-retaining). Same 8×8 mm switch family; this one latches.