1 / 6
Biblically Accurate Printrbot Simple Metal Z Axis Block — zdjęcie 1
1 / 6

Biblically Accurate Printrbot Simple Metal Z Axis Block

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Original Z block CAD + upgrade/modification for standardized lead screw nuts

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

A very snug square fit, tricky to install, but seem to have unparalleled alignment unmatched by any other design.

Attention:

It has been observed that the Z nut can impede minimum Z height when using particularly large Z couplers. A new model is being worked on this to address this issue. The model has been updated to provide additional Z clearance.

In the meantime, you can always mirror the part, and install the nut on the top of the Z axis, rather than the bottom.

Notes:

  • Nut recesses are ISO size and may not fit all nuts.

  • Tricky overhang. Print with tree support. See screenshot.

  • Support different sized leadscrew nuts -- the 16mm round or the 18mm flat.

FreeCAD source file is provided. Original "design" stl is given.

Note: approximated dimensions. May not work properly. See below.

From "HD" stl model available on github, the coordinates of 4 given points are:
point 1: -8.135018, -10.5, 11.784539
point 2: -7.762982, -10.5, 6.820060
point 3: -10.4382, -10.5, 9.3023 (exact)
point 4: -5.4598, -10.5, 9.3023 (exact)
Giving us the coordinate of -7.949, -10.5, 9.3023.
Do the -7.949 + (13.875+17.125)/2 (hole for nema motor), the dimension is 23.449.
edge 1: 21.049999, ..., ...
hole 1: -17.125, -15.5,15.875; 13.875, -15.5, 15.875
hole 2: exact center. 9.15, -15.5, 13.9xxx (inside, doesnt matter)
hole 3: 13.875, -15.5, 15.875; 17.125, -15.5, 15.875
edge 2: 21.049999, -17.32501 (doesnt matter), 15.875

Center symmetrical, give us the dimensions for holes.