Folding Lowered Brace with short buffer tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Folding brace that is lowered by 1 inch for better eye line. 2 models exist - LEFT or RIGHT folding option! As noted…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Folding brace that is lowered by 1 inch for better eye line. 2 models exist - LEFT or RIGHT folding option! As noted in the pics, it may cover the grip and trigger, so the alternate folding may be preferred if you are right- or left-handed.
I included a shortened version of Mussy's extension tube, that is hollow for carrying batteries etc.
You may print the one-piece to avoid extra connections. All models require at least one of Mussy's buffer tube nut. Recommend this one vs. a metal one to avoid scratching the finish on the receiver! It can be downloaded here: https://www.thingiverse.com/thing:3210087
All models are oriented for optimum print quality.
Use supports "touching buildplate only". Supports in the threaded areas will result in a bad time cleaning them up!
Brim is recommended.
Infill - use at least 4 walls/perimeters with at least 50% infill
Uses a 5/32" x 1.5" roll pin, and a 1" spring, both sourced from the local ACE Hardware! Install the pin from the bottom. You may need to drill out the hole with a 5/32" drill bit. The pin hole folding extension will obviously need to be enlarged bigger. I used an 11/64" drill bit and it worked perfectly - no wobble!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
50-100%
Filament: eSun PLA+ Any
Category: DIY