Konica Minolta Relay Unit RU Replacement Lever
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick replacement for Konica Minolta relay unit lever.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
A quick replacement for the notorious green RU jam clearance lever found inside Konica Minolta production presses with attached Relay Unit Modules. The original injection-molded parts frequently stress-fracture near the retention pin under heavy daily use. This model drops directly onto the factory spring-loaded metal bracket assembly.
Compatible Modules: Fits RU-509, RU-510, RU-511, RU-518, and RU-518m relay units.
Compatible Machine Models with above Relay Units: AccurioPress Color: C4080, C4070, C3080, C3070, C6100, C6085, C14000, C12000
AccurioPress Mono: 7136, 7136P, 7120, 6136, 6136P, 6120
bizhub PRESS / PRO: C1100, C1085, C1070, C1060, C1070P
Print Instructions: The original mold was PET, Must be printed in PETG or ABS/ASA. Do not use PLA, as the internal operating temperatures near the fusing unit conveyance paths will cause PLA to soften and sag over time.
For maximum structural strength around the pivot pin hinge, print with 4 perimeters (walls), 4 top/bottom layers, and a minimum of 10% infill.
Used as a successful field fix.