ARK Charging Handle for DIY Upper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modification of BrewNinja's ARK Charging Handle. This one is for the "DIY" Upper in the ARK files. Changes include:…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Modification of BrewNinja's ARK Charging Handle. This one is for the "DIY" Upper in the ARK files. Changes include:
- Designed for the "DIY" Upper!
- Enlarged handle cover for an easier grip
- Main contact area is hollow to allow insertion of a screw for reinforcement
- Beveled surfaces so it works properly within the DIY upper with no binding\sticking when in use
- Altered height of main assembly for proper clearance within the upper assembly.
- Room for an optional ballpoint screw detent: this will require addition of a detent "pocket" on the upper to accommodate
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
90%
Filament: eSun PLA+ Any
Notes:
Print with current orientations. No fear of breakage due to the assumption that a screw insert will be used for proper reinforcement. Brim or Rafts preferred depending on your printing situation. At least 4 walls and 90% infill is preferred.
Category: DIY