Modular Mini Skatepark: 12x9 Halfpipe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular 12x9x3.5" fingerboard halfpipe. Uses interlocking dovetail bases and hybrid pin top joints for toolless assembly
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bring the skatepark to your desk! This compact 12" x 9" x 3.5" halfpipe features a fully modular interlocking system designed for easy printing, customization, and expansion.
Key Features:
Modular 4-Base Footprint: The lower assembly uses custom dovetail joints to securely lock four base pieces together without requiring hardware or glue.
Hybrid Pin & Hole Upper Connection: Ramps and top deck sections snap securely onto the base tiles using alignment pins for seamless, flush transitions during rides.
Compact & Desk-Friendly: Perfectly sized for fingerboards, TECH DECKs, and mini scale builds while keeping overall print bed requirements small.
Assembly & Printing Tips:
Supports: Minimal to none required depending on your bridge settings.
Infill: 5%–20% Grid or Gyroid for a sturdy, durable build.
Tolerances: Dovetails and pins are tuned for standard 0.2mm layer height printing. If your printer runs tight, light sanding on the joint pins may assist initial fitting.