BQ Station G3 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BQ Station G3 Meshtastic Meshcore Case no support
- Ocena
- 4 / 5
- Polubienia
- 10
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 464
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
BQ Station G3 Case. No support needed to print.
Update: Added models that use hardware for lid.
"g3 case (hardware)" and "g3 lid (hardware)" use M3 x 6mm bolts and M3 x 4 x 4.2 heat sets.
"g3 case (no heatset)" and "g3 lid (hardware)" use M3 x 8mm (or longer) bolts that directly thread into the case. Not as strong, but plenty for most use cases.
The mounting pattern on the bottom of (hardware) versions is 59.5 mm x 126.5 mm square. Can add a heatset and use those holes to mount to an enclosure.
M3 x 5mm length bolts and M3 x 4x 4.2 heat set inserts used to mount board (need to temporarily remove RF module).
(loose) variants have 0.5 mm more room for board fitment if you run into tolerance issues.
(superglue) version would be good if you want a tamper-resistant setup. Was originally made as a quick and dirty case.