1 / 3
prodloužení zalomené trubky ke stanu průměr 16mm — zdjęcie 1
1 / 3

prodloužení zalomené trubky ke stanu průměr 16mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

prodloužení zalomené trubky ke stanu průměr 16mm

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

A reliable 3D-printable replacement insert pin designed to connect tent poles or awning frames. This heavy-duty model serves as a sturdy sleeve joiner to repair broken or lost original connectors, saving you from buying a completely new tent frame.

The pin features a robust center stop ring to prevent over-insertion and ensure equal spacing inside both tube ends. It also includes an integrated screw lock hole at the base to securely clamp or bolt the connector into the primary tent pole.

Technical Specifications:

  • Total Length: 110 mm

  • Outer Diameter (Sleeve): 16.5 mm

  • Features: Integrated center stopper ring & screw mounting hole at the bottom.

Print Settings Recommendations:

Since tent parts are exposed to high physical tension and outdoor weather elements, standard PLA is not recommended.

  • Material: ASA (e.g., Spectrum ASA 275), ABS, or PETG for high UV resistance and structural durability.

  • Perimeters (Walls): At least 4–6 layers for maximal bending strength.

  • Infill: 40% – 60% (Grid, Gyroid, or Cubic) or 100% Solid for heavy-duty setups.

  • Orientation: Print horizontally with supports enabled for maximal layer adhesion strength along the length, or vertically if you have exceptional layer bonding.

Tagi