Držák slunečníku /Umbrella Pole Sleeve & Clamp Replacement / Parasol Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
šroubovací držák na slunečník
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
A heavy-duty replacement sleeve and clamp adapter designed for outdoor sun umbrellas (parasols) and patio stands. Original plastic collars on umbrella stands easily crack due to overtightening, high winds, and sun exposure. This 3D-printable model serves as a robust fix to restore the clamping force and keep your umbrella stable.
The model features high wall thickness to sustain heavy mechanical clamping loads and outdoor stress. It is split into precise structural segments designed to tightly hug the pole and adapt it safely to the stand mechanism.
Technical Specifications:
Application: Parasol stands, patio umbrella holders, sunshade pole adapters.
Design: Multi-part reinforced clamp ring system for optimal distribution of tightening pressure.
Print Settings Recommendations:
Since this part will be under constant mechanical tension and directly exposed to brutal summer sun and heat, do not print this in PLA.
Material: ASA (such as Spectrum ASA 275) or ABS is highly recommended for its exceptional UV resistance, weatherproofing, and high thermal stability (won't deform under direct summer sunlight). PETG can be used as a minimum baseline alternative.
Perimeters (Walls): 5–6 layers minimum (increases structural integrity far better than just infill).
Infill: 50% – 80% (Gyroid or Cubic infill patterns provide great multi-directional strength).
Cooling Fan: Keep it low (approx. 10-20% depending on your printer setup) to maximize layer adhesion and prevent splitting in ASA.